Product Categories
Contact Us

ADDRESS:NO.39 Jinrong Road, Shuangfeng Economic Development Zone, Hefei city, Anhui, China

+8613965130494  (Whatsapp)




Home > News > Content
Test And Application Of Quartz Sand Ore Colour Separator For Glass

At present, market ore color separators are mainly used in non-metallic ores, non-ferrous metals, precious metals and ferrous metals, especially in non-metallic ores. Compared with other ore separation technologies, the advantages of color separation are better separation effect, lower cost and environmental pollution, and thoroughly solved the problems of high cost, low efficiency and low output of manual separation.

The working principle of the color sorter: the selected material enters the machine from the top hopper, slides down the channel through the vibration of the vibrator device, accelerates the falling into the observation area of the sorting room, and passes through the sensor and the background plate. Under the action of light source, according to the intensity and color change of light, the system generates output signal to drive the solenoid valve to work, blows out the heterochromatic particles into the waste chamber of the hopper, and the good selected materials continue to fall into the finished product chamber of the hopper, so as to achieve the purpose of sorting.

The application time of ore color separator in the field of ore is relatively short. Many mining enterprises are not very familiar with ore color separator, and even do not believe in the performance of ore color separator. Therefore, when choosing and purchasing ore color separators, we should pay attention to several matters: first, we should listen to the analysis of equipment by manufacturers, analyze the professional performance of products, and never fall into the misunderstanding of "using grain color separators or reforming machines for ore dressing".

Secondly, it depends on the test and analysis of the manufacturer. It is suggested that you take or send material to the color sorter manufacturer for personal test and inspection.

Thirdly, practice is the sole criterion for testing truth. This is the most important point. We should go to the manufacturers that have been using it for a long time. A good equipment can not be achieved by one or two tests or repeated repairs. It should be applied to the actual production of ore enterprises, and it is used for a long time with high efficiency. So, I always insist that you take a look at the long-term customers, which most mining enterprises want to see.

Enterprises, especially large-scale automation equipment such as ore color separators, operate not only products, but also conscience. Colour separator is the core and weakest link in the ore production line, so we must be careful in the process of selecting ore color separator. In order to achieve a good result, the technological process of ore production must be combined with the ore color separator. Only conscientious enterprises are full of vitality, can they live for a hundred years, can they produce conscientious products, and let users rest assured. It is also hoped that the vast number of mining enterprises will recognize the development of the market and choose carefully. Finally, I hope that the mining enterprises, color separator manufacturers and we can make progress and common development, and make joint efforts for the development of China's mining industry!

Hefei Mingde Optoelectronic Technology Co.,Ltd
Copyright © Hefei Mingde Optoelectronic Technology Co.,Ltd All Rights Reserved.